FDA Mincer Sausage Maker Stuffer Machine Hand For Home Sausage
Making
Sausage Stuffing Directions:
⇒ When you are ready to start stuffing, remove cylinder from frame
and fill with your favorite recipe of ground meat
⇒ Slide cylinder back into frame
⇒ Properly prepare casings as directed on casing packaging
⇒ Slip a casing over the end of the funnel tube until the entire
length of the casing is on the funnel
⇒ Twist or tie the end to seal the casing
⇒ By rotating the handle clockwise, you will move the piston down
and force the sausage mixture down and through the funnel into the
casing
⇒ Hold the casing on the sausage tube in one hand and slowly let the meat
output pull the casing from the tube
⇒ Fill casing as desired by holding casing back on tube
⇒ While extruding the sausage, hold the casing against the end of
the funnel to help pack the sausage firmly into the casing
⇒ Twist or tie the sausage into links as desired
⇒ Tie end of casing into a knot
⇒ Repeat this procedure until you have completed your sausages
Assembly Instructions:
| 1 | You new vertical stuffer comes partially assembled. |
| 2 | However, you need to complete a few steps to be ready to begin
stuffing your own sausage |
| 3 | Attach the handle to the stuffer frame by inserting the wing nut
through the handle and into the rear of the small horizontal gear |
| 4 | Turn the wing nut until tight |
| 5 | You can now turn the handle and actuate the piston |
| 6 | Turn the handle counter-clockwise so that the center thread rod and
piston moves to the top of the stuffer frame |
| 7 | Stuffing tubes attach to the stuffer cylinder by threading the tube
through the ring lock and tightening the ring lock onto the
cylinder |
| 8 | With the center thread rod and the piston at the top of the stuffer
frame |
| 9 | The cylinder can be moved in and out of the base |
Description:
- Heavy duty contruction makes the stuffer easily mounted on any
counter-top
- Stainless steel cylinder is easily removed for filling and cleaning
- Stainless steel base with holes for attachment to tabletop
- Heavy-duty piston comes with a stainless steel air-releave valve to
let air excape from the cylinder while stuffing sausage
- Including three stuffing tubes in 3/4'', 7/8'' and 1-1/4''.
Specifications:
| Item Number |
ST-604005
| ST-604010 | ST-604015 |
| Capacity(lbs/hr) | 5 lb. (2.3kg) | 10 lb. (4.5kg)
| 15 lb.(6.8kg)
|
| Master pack | 1 pc/ctn
| 1 pc/ctn
| 1 pc/ctn
|
| Measure | 11"x8"x17" 260x205x415mm
| 13.7"x9.8"x21" 350x250x535mm
| 13"x11"x23" 340x290x580mm
|
| Weight | 11/10 lb.(5/4.5kgs) | 19.8/17.6 lb.(9/8kgs) | 31/26 lb.(14/12kgs) |
